BU33SD2MG-M
1-Kanal 200 mA CMOS-LDO-Regler
BU33SD2MG-M
1-Kanal 200 mA CMOS-LDO-Regler
BUxxSD2-M-Serie ist ein leistungsstarker CMOS-LDO-Regler mit einem Ausgangsstrom von 200 mA, der auf das vielseitige Paket SSOP5 (2,90 mm x 2,80 mm x 1,25 mm) montiert wird.
Er verfügt trotz des geringen Schaltstromverbrauchs von 33 µA über ein hervorragendes Geräuschverhalten und Ansprechverhalten auf Lasten. Er eignet sich am besten für verschiedene Anwendungen wie Netzteile für logische IC, HF und Kameramodule.
Produktdetails
Funktionalen Sicherheit:
Spezifikationen:
ch
1
Withstand Voltage (Max.)[V]
6.5
Vin(Min.)[V]
1.7
Vin(Max.)[V]
6
Iout(Max.)[A]
0.2
Vout Type
Fixed
Vout Accuracy
±2.0%
Circuit Current[mA]
0.033
Dropout Voltage (Typ.)[V]
0.085(Io=0.1A)
Ripple Rejection [dB]
68
Load Regulation[mV]
0.5(Io=1 to 100mA)
Output Capacitor[µF]
0.47
Shutdown Function
Yes
Thermal Shut-down
Yes
Over Current Protection
Yes
Over Voltage Protection
No
Under Voltage Lock Out
No
Discharge Function
No
Soft Start
No
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
105
Common Standard
AEC-Q100 (Automotive Grade)
Eigenschaften:
・ High-accuracy output voltage of ±2.0% (In all recommended condition)・ High ripple rejection: 68 dB (Typ., 1 kHz,)
・ Compatible with small ceramic capacitor (Cin=Cout=0.47 μF)
・ Low current consumption: 33 μA
・ ON/OFF control of output voltage
・ With built-in over current protection circuit and thermal shutdown circuit
・ Package SSOP5 is similar to SOT23-5(JEDEC)
Reference Design / Application Evaluation Kit
-
- Application EVK - APEVK66001
- Industrial 3.6kW Totem Pole PFC Application EVK
Various applications are equipped with AC/DC functions, and the Totem Pole PFC topology is the standard circuit.The TPPFCSIC-EVK-301 implements a single-phase AC/DC conversion stage in Totem Pole PFC topology. Key components are ROHM Gen.4 SiC MOSFETs (SCT4045DR) as the main high-frequency switching elements, as well as the BM61S41 single-channel isolated gate driver IC. In addition, SJ MOSFETs and auxiliary power supply, among other components from ROHM, were utilized to create a high-performance AC/DC circuit for single-phase operation.TPPFCSIC-EVK-301 reaches up to 98.5％ efficiency at 230Vac.If this Totem Pole PFC reference design is coupled with a secondary stage of comparable efficiency, it becomes possible to achieve the 80+ Titanium target efficiency of power supply products. Moreover, this contributes to enhancing the Annual Performance Factor (APF) of air conditioners.
This reference design consists of two boards. Each is shown below.
- TPPFCSIC-EVK-201_PCB3051：Totem Pole PFC Board
- TPPFCSIC-EVK-201_PCB3052 : AUX Power Supply Board
The software for this reference design can be downloaded from below.
[TPPFCSIC-EVK-301_SW.zip Download]
