35 V Stehspannung 1 A LDO-Regler - BD50FC0FP (In Entwicklung)

Der BD50FC0FP ist ein Regler mit geringer Sättigungsspannung. Die Ausgangsspannung des BD50FC0FP beträgt 5,0 V, die Gehäusebezeichnung lautet TO252-3. Der BD50FC0FP verfügt über einen integrierten Überstromschutz, der eine Zerstörung des IC durch Kurschlüsse am Ausgang verhindert, und über einen thermischen Abschaltkreis, der den IC vor thermischen Schäden durch Überlastung schützt.

* Dieses Produkt entspricht der STANDARD-Güte und wird nicht für Fahrzeugteile empfohlen.
Minimale Gehäusemenge
BD50FC0FP-E2 Under Development TO252-3 2000 2000 Taping Ja
Grade Standard
Breakdown Voltage(Max.)[V] 35.0
ch 1
Vin(Min.)[V] 4.0
Vin(Max.)[V] 26.5
Vout (Typ.) [V] 5
Vout Precision ±1
Iout(Max.)[A] 1.0
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
Operating Temperature (Min.)[°C] -25
Operating Temperature (Max.)[°C] 85
    • Output current capability: 1A
    • Output voltage: 5.0V
    • High output voltage accuracy (Ta=25°C): ±1%
    • Low saturation with PDMOS output
    • Built-in over-current protection circuit that prevents the destruction of the IC due to output short circuits
    • Built-in thermal shutdown circuit for protecting the IC from thermal damage due to overloading
    • Available Ceramic Capacitor to prevent oscillation
    • TO252-3 package
Weitere neue/aktualisierte Produkte im Zusammenhang mit Energieverwaltung / Power Management
TEILENUMMER Produktname Gehäuse Datenblatt Lieferbare Bestände
BD00FC0WFP 35 V Stehspannung 1 A LDO-Regler TO252-5   Kaufen
BD30FC0WFP 35 V Stehspannung 1 A LDO-Regler TO252-5   Anfrage
BD33FC0WFP 35 V Stehspannung 1 A LDO-Regler TO252-5   Kaufen
BD50FC0WFP 35 V Stehspannung 1 A LDO-Regler TO252-5   Kaufen
BD60FC0WFP 35 V Stehspannung 1 A LDO-Regler TO252-5   Anfrage
BD70FC0WFP 35 V Stehspannung 1 A LDO-Regler TO252-5   Anfrage
Neue Produkte:
ROHM Semiconductor behält sich das Recht vor, die Spezifikationen jederzeit zu ändern.
Technische Daten
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BDxxFC0 Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.