Downloading...
 
product-image
 

Power-Management-IC für Nahfeldkommunikations-LSI - BD7602GUL

Der BD7602GUL ist ein Energieverwaltungssystem IC für mobile Geräte mit NFC IC. Jeder LDO Ausgang ist durch 2 seriellen Schnittstellenleitungen kontrolliert, welche das I²C Bus Protokoll unterstützen. Dies hilft es bei der Integration aller PMIC für den NFC IC Platz zu sparen.

* Dieses Produkt entspricht der STANDARD-Güte und wird nicht für Fahrzeugteile empfohlen.
Teilenummer
Status
Gehäuse
Einheitenmenge
Minimale Gehäusemenge
Gehäusetyp
RoHS
BD7602GUL-E2 Active VCSP50L1C 3000 3000 Taping Ja
 
Spezifikationen:
Grade Standard
ch 2
Vin(Min.)[V] 2.7
Vin(Max.)[V] 5.5
Vout (Typ.) [V] 3
Iout(Max.)[A] 0.1
Iout2(Max.)[A] 0.15
Thermal Shut-down Yes
Over Current Protection Yes
Operating Temperature (Min.)[°C] -35
Operating Temperature (Max.)[°C] 85
Eigenschaften:
  • · Niedrige Stromaufnahme von 10 µA (typisch)
    · 2-Kanal-LDO
    · UVLO-Erkennung (2,7 V)
    · 1-Kanal-GPO
    · Funktion für thermische Abschaltung
    · Serielle Schnittstelle mit 2 Leitungen und Unterstützung für das I²C-Bus-Protokoll
 
 
IN VERBINDUNG STEHENDE PRODUKT
Weitere neue/aktualisierte Produkte im Zusammenhang mit Energieverwaltung / Power Management
TEILENUMMER Produktname Gehäuse Datenblatt Lieferbare Bestände
BD7004NUX 2-Kanal CMOS-LDO-Regler mit variablen Schritten VSON008X2020   Kaufen
BD7003NUX 2-Kanal CMOS-LDO-Regler mit variablen Schritten VSON008X2020   Kaufen
BU6651NUX 3-Kanal CMOS-LDO-Regler VSON008X2030   Kaufen
BU6650NUX 3-Kanal CMOS-LDO-Regler VSON008X2030   Kaufen
BA3259HFP Zweifach-LDO-Regler mit festem/variablem Ausgang HRP5   Kaufen
BA33D18HFP Zweifach-LDO-Regler mit festem Ausgang HRP5   Kaufen
Neue Produkte:
 
 
Technische Daten
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.