1-Kanal 150 mA CMOS-LDO-Regler - BH18RB1WGUT

ROHM's LDO Regler für tragbare Geräte haben originale CMOS Prozesse für niedrigen Verbrauch und hohe Präzision. Standard CMOS LDO Regler zeichnen sich durch geringe Sättigung, +1 % Präzision der Ausgangsspannung und maximalen Ausgangsstrom von 150 mA aus. Die Original-Technologie wird für Ladungsregulierung von 2mV und einem Ein-/Ausgangsspannungsunterschied von nur 100mV genutzt. Zusätzlich sorgen zahlreiche Schutzschaltungen und das sehr kompakte Gehäuse (VCSP60N1: 1,0 mm×1,04 mm) für mehr Verlässlichkeit.

* Dieses Produkt entspricht der STANDARD-Güte und wird nicht für Fahrzeugteile empfohlen.
Minimale Gehäusemenge
BH18RB1WGUT-E2 Active VCSP60N1 3000 3000 Taping Ja
Grade Standard
Breakdown Voltage(Max.)[V] 6.5
ch 1
Vin(Min.)[V] 2.5
Vin(Max.)[V] 5.5
Vout (Typ.) [V] 1.8
Vout Precision ±25mV
Iout(Max.)[A] 0.15
Circuit Current[mA] 0.034
Output Short Current[mA] 40
Shutdown Function Yes
Thermal Shut-down Yes
Over Current Protection Yes
Over Voltage Protection No
Discharge Function No
Soft Start No
Ripple Rejection [dB] 63.0
Load Regulation[mV] 2(Io=1 to 100mA)
Input Capacitor[µF] 1.0
Output Capacitor[µF] 1.0
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
  • ・High accuracy output voltage : ±1%
    ・Low dropout voltage : 100mV (when current is 100mA)
    ・Stable with small ceramic output capacitors
Weitere neue/aktualisierte Produkte im Zusammenhang mit Energieverwaltung / Power Management
TEILENUMMER Produktname Gehäuse Datenblatt Lieferbare Bestände
BH15RB1WGUT 1-Kanal 150 mA CMOS-LDO-Regler VCSP60N1   Kaufen
BH25RB1WGUT 1-Kanal 150 mA CMOS-LDO-Regler VCSP60N1   Kaufen
BH28RB1WGUT 1-Kanal 150 mA CMOS-LDO-Regler VCSP60N1   Kaufen
BH29RB1WGUT 1-Kanal 150 mA CMOS-LDO-Regler VCSP60N1   Kaufen
BH30RB1WGUT 1-Kanal 150 mA CMOS-LDO-Regler VCSP60N1   Kaufen
BH31RB1WGUT 1-Kanal 150 mA CMOS-LDO-Regler VCSP60N1   Anfrage
Neue Produkte:
Technische Daten
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BHxxRB1, BHxxSA3, BUxxSA4, BUxxSA5 Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.