Downloading...
 
product-image
 

1-Kanal 200 mA CMOS-LDO-Regler - BU12TD2WNVX

Die BU ** TD2WNVX / BU ** TD3WG Serie integriert einen 200 mA Ausgangs Hochleistungs-FULL-CMOS-Regler in einem ultrakompakten SSON004X1010 Paket (1,0 mm × 1,0 mm × 0,6 mm) & SSOP5 Paket (2,9 mm × 2,8 mm × 1,15 mm). Zusätzliche Funktionen beinhalten einen Stromkreislauf von nur 35µA für niedrigen Stromverbrauch bei Eigenschaften eines höheren Geräuschpegels und Ladeantwort, welches ihn für die Verwendung in Stromeinrichtungen für eine breite Bandbreite von Anwendungen, logische ICs, RF Kreisläufe und Kameramodule inbegriffen, ideal macht.

* Dieses Produkt entspricht der STANDARD-Güte und wird nicht für Fahrzeugteile empfohlen.
Teilenummer
Status
Gehäuse
Einheitenmenge
Minimale Gehäusemenge
Gehäusetyp
RoHS
BU12TD2WNVX-TL Active SSON004X1010 5000 5000 Taping Ja
 
Spezifikationen:
Grade Standard
Breakdown Voltage(Max.)[V] 6.5
ch 1
Vin(Min.)[V] 1.7
Vin(Max.)[V] 6.0
Vout (Typ.) [V] 1.2
Vout Precision ±25mV
Iout(Max.)[A] 0.2
Circuit Current[mA] 0.035
Output Short Current[mA] 70
Shutdown Function Yes
Thermal Shut-down Yes
Over Current Protection Yes
Over Voltage Protection No
Discharge Function Yes
Soft Start No
Ripple Rejection [dB] 70.0
Load Regulation[mV] 10(Io=1 to 100mA)
Input Capacitor[µF] 0.47
Output Capacitor[µF] 0.47
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
Eigenschaften:
  • ・Sehr präzise Ausgangsspannung von ±1% (±25 mV bei Produkten mit Vaus < 2,5V)
    ・Hohe Brummunterdrückung: 70 dB (typ., 1 kHz,)
    ・Kompatibel mit kleinen Keramikkondensatoren (CIN=Co=0,47 µF)
 
 
IN VERBINDUNG STEHENDE PRODUKT
Weitere neue/aktualisierte Produkte im Zusammenhang mit Energieverwaltung / Power Management
TEILENUMMER Produktname Gehäuse Datenblatt Lieferbare Bestände
BU11TD2WNVX 1-Kanal 200 mA CMOS-LDO-Regler SSON004X1010   Anfrage
BU1ATD2WNVX 1-Kanal 200 mA CMOS-LDO-Regler SSON004X1010   Kaufen
BU23TD2WNVX 1-Kanal 200 mA CMOS-LDO-Regler SSON004X1010   Kaufen
BU10TD2WNVX 1-Kanal 200 mA CMOS-LDO-Regler SSON004X1010   Kaufen
BU15TD2WNVX 1-Kanal 200 mA CMOS-LDO-Regler SSON004X1010   Kaufen
BU18TD2WNVX 1-Kanal 200 mA CMOS-LDO-Regler SSON004X1010   Kaufen
Neue Produkte:
 
 
Technische Daten
Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BUxxUA3, BUxxTD2 Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.